DeoxIT sredstvo za čišćenje. Čisti kontakate kablova, baterija, sijalica, uređaja. . . Proizvođač: DEOXITOznaka: D100L Stanje: Novo----
Unique contact cleaner, rejuvenator, conductivity enhancer and lubricant. Dissolves oxidation and corrosion on metal surfaces. Fills in microscopic gaps and reseals surface for better contact to enhance ow of electricity. Chemically improves metal-to-metal connections and contacts. Improves connector performance/reliability. Temperature range: -34 to +200OC.
Features/Benets: 100% Liquid, Safe on plastics. DeoxIT® D100L concentrate has approximately 20% chemical cleaning action. Excellent cleaning/deoxidizing, good protection, no ozone depletion. Improves conductivity and reduces intermittent connections. Reduces arcing, RFI, wear and abrasion. Cleaner Audio - Clearer Video - Reliable Data.
Use DeoxIT® D-Series contact cleaner on surfaces that have been in service or have visual signs of oxidation. Contains 20% active cleaner.
Use DeoxIT® Gold G-Series conditioner on new surfaces, and gold plated surfaces. Ideal for preventing
dendrite/fretting corrosion. Protects both surface and base metals. Ideal for critical applications. Contains >1% active cleaner.
Use DeoxIT® Shield S-Series to protect surfaces from severe environments (humidity, salts, pollutants,
sulfur, etc. ). Use on clean surface. Contains 0% active cleaner.
Directions for Use: 1. Turn o, unplug the device. 2. Select the applicator (pen, wipes, needle, etc. ) that is best for your application, see #8 below. Apply a small amount to the metal contact/connector surface. 3. Operate the part/device to help break up oxides and contamination. Wait a few minutes, then wipe o surface with clean lint-free cloth or swab to remove oxidation and contamination. 4. Re-apply DeoxIT® to metal surface and wipe o excess. It is important to wipe o excess, DeoxIT® works best when a thin coating is on metal surfaces. Wait two minutes before turning on equipment. Test for compatibility before use. 5. In extreme cases (severe oxidation or corrosion), you may need to leave DeoxIT® on overnight. If that is necessary; apply, then the following day remove any contaminants lifted by DeoxIT® with a lint free swab or cloth on accessible surfaces (If surface is not accessible, repeat step two above. ). When surface is clean (no residue on the swab/cloth), nish with a short burst of DeoxIT® , then remove excess leaving a thin layer. 6. If you notice a green or black coloration on the surface (may take a few days) after applying DeoxIT® , this indicates dissolved oxidation (surface was severely oxidized). Follow step “2-5” above one more time. 7. For extended protection: After surface is clean, apply DeoxIT® Gold G-Series for indoor applications or DeoxIT® Shield S-Series for outdoor applications. 8. Applicators: a) Squeeze Tube (#D100L-2C): Used by OEMs for maintenence kits. Provides small drop to surface. b) Pen - felt tip (#D100P): Precision application, slight abrasive action. Provides liquid through felt tips. Replacement tips available. c) Oiler Pen (#D100L-P6C): Very precise application of uid. Provides pin-point application of liquid. Ideal for hard to reach applications. d) Oiler Squeeze Bottle (#D100L-25C): Similar to Oiler Pen, except in squeeze bottle. e) Wipes (#K-D1W-25 and K-D1W-50): Individual packaged wipes (thin paper material). For connections easily accessible and smooth surfaces, i. e. audio/video connections, batteries, etc
f) Wipes (#K-D50W): Jar with 50 wipes (thick cotton material). For connections easily accessible accessible and smooth and irregular surfaces, i. e. edge connectors, industrial connections. g) Brush (#D100L-2DB): Small 7.4 mL bottle with brush applicator. General purpose for applying liquid with a nylon brush. Ideal for applying to outer and inner surface with wiping action. Care should be taken to keep brush clean. h) Bulk Bottles (#D100L-2, D100L-12, D100L-32): For production applications. Contact CAIG for information. 9. NOTE: For Field Service use, see Bulletin “ Field Service 9-1-1” (http: //store. caig. com/s. nl/it. I/id.56/. f). For Manufacturing/OEMs see Bulletin “ Manufactruing/OEM 9-1-1” (http: //store. caig. com/s. nl/it. I/id.61/. f)