Dodaj u listu želja

PLA Filament za 3D štampač kotur 1KG/1.75mm plavi (3DP-PLA1.75-01-FB)

1.950,- RSD
PLA Filament za 3D štampač kotur 1KG/1.75mm plavi (3DP-PLA1.75-01-FB)
Materijal: PLA, 1,75 mm, prečnik
Težina: 1 kg / kalem (2.2 lbs)
Dužina: 330 m
Melt Flow Index at 10 min, 2.16 kg: 5
Tačka topljenja: 190-220 °C
Heat-Deflection-Temperature at 0.455 MPa: 50 °C
Yield Strength at 5mm/min: 45 MPa
Impact Strength: 5 KJ/m2
Ensile Break: 20 %
Prečnik: 1,75 ± 0,05 mm
Kalem dimenzije: 200 mm prečnik, 67 mm visina, 53 mm centralna rupa
1.950,- RSD
Postavljen: 12.12.2019. 09:37
Pozovi / Vidi broj telefona
Odustani
Svi oglasi korisnika

Podelite objavu

Slični proizvodi

1.950,- RSD
Detaljnije
PLA Filament za 3D štampač kotur 1KG/1.75mm plavi (3DP-PLA1.75-01-FB)

PLA Filament za 3D štampač kotur 1KG/1.75mm plavi (3DP-PLA1.75-01-FB) Materijal: PLA, 1,75 mm, prečnik Težina: 1 kg / kalem (2.2 lbs) Dužina: 330 m Melt Flow Index at 10 min, 2.16 kg: 5 Tačka topljenja: 190-220 °C Heat-Deflection-Temperature at 0.455 MPa: 50 °C Yield Strength at 5mm/min: 45 MPa Impact Strength: 5 KJ/m2 Ensile Break: 20 % Prečnik: 1,75 ± 0,05 mm Kalem dimenzije: 200 mm prečnik, 67 mm visina, 53 mm centralna rupa

2.600,- RSD
Detaljnije
PETG Filament za 3D štampač kotur 1KG/1.75mm crni (3DP-PETG1.75-01-BK)

PETG Filament za 3D štampač kotur 1KG/1.75mm crni (3DP-PETG1.75-01-BK) Material: PETG, 1.75 mm diameter Weight: 1 kg/spool (2.2 lbs) Density at 240°C: 1.27 g/cm3 Melt Flow Index at g/10min, 200°C/ 5kg: 20 Melt Point: 220 - 260 °C Heat-Deflection-Temperature at 0.455 MPa: 60 - 80 °C Yield Strength at 5mm/min: 50 MPa Impact Strength: 8.7 KJ/m2 Ensile Break: 120 % Diameter: 1.75 ± 0.05 mm Spool dimensions: 200 mm diameter x 67 mm height x 53 mm central hole Sistemski zahtevi: 3D štampač sa 1.75mm ekstruder temperature oko 240 °C, pogodno za PETG vlakna

1.950,- RSD
Detaljnije
PLA Filament za 3D štampač 1,75mm kotur 1KG sivi (3DP-PLA1.75-01-GR)

PLA Filament za 3D štampač 1,75mm kotur 1KG sivi (3DP-PLA1.75-01-GR) Može se primeniti na različitim 3D štampačima Material: PLA, 1.75 mm diameter Weight: 1 kg/spool (2.2 lbs) Length: approx. 330 m Density at 21.5 °C: 1.25 g/cm3 Melt Flow Index at 10min, 2.16kg: 5 Melt Point: 190 - 220 °C Heat-Deflection-Temperature at 0.455 MPa: 50 °C Yield Strength at 5mm/min: 45 MPa Impact Strength: 5 KJ/m2 Ensile Break: 20 % Diameter: 1.75 ± 0.05 mm Spool dimensions: 165 mm diameter x 100 mm height x 40 mm central hole Sistemski zahtevi: 3D štampač sa 1.75 mm ekstruder temperature oko 200 °, pogodan za PLA vlakna

1.950,- RSD
Detaljnije
Gembird PLA filament za 3D štampač 1,75mm kotur 1KG providni (3DP-PLA1.75-01-TR)

Gembird PLA filament za 3D štampač 1,75mm kotur 1KG providni (3DP-PLA1.75-01-TR) Material: PLA, 1.75 mm diameter Weight: 1 kg/spool (2.2 lbs) Length: approx. 330 m Density at 21.5 °C: 1.25 g/cm3 Melt Flow Index at 10min, 2.16kg: 5 Melt Point: 190 - 220 °C Heat-Deflection-Temperature at 0.455 MPa: 50 °C Yield Strength at 5mm/min: 45 MPa Impact Strength: 5 KJ/m2 Ensile Break: 20 % Diameter: 1.75 ± 0.05 mm Spool dimensions: 165 mm diameter x 100 mm height x 40 mm central hole Sistemski zahtevi: 3D štampač sa 1.75 mm ekstruder temperature oko 200 °, pogodan za PLA vlakna

1.950,- RSD
Detaljnije
PLA Filament za 3D stampač 1,75mm kotur 1KG crven (3DP-PLA1.75-01-R)

PLA Filament za 3D stampač 1,75mm kotur 1KG crven (3DP-PLA1.75-01-R) Može se primeniti na različitim 3D štampačima Material: PLA, 1.75 mm diameter Weight: 1 kg/spool (2.2 lbs) Length: approx. 330 m Density at 21.5 °C: 1.25 g/cm3 Melt Flow Index at 10min, 2.16kg: 5 Melt Point: 190 - 220 °C Heat-Deflection-Temperature at 0.455 MPa: 50 °C Yield Strength at 5mm/min: 45 MPa Impact Strength: 5 KJ/m2 Ensile Break: 20 % Diameter: 1.75 ± 0.05 mm Spool dimensions: 165 mm diameter x 100 mm height x 40 mm central hole Sistemski zahtevi: 3D štampač sa 1.75 mm ekstruder temperature oko 200 °, pogodan za PLA vlakna

1.690,- RSD
Detaljnije
Gembird PLA Filament za 3D štampač 3mm kotur 1KG crni (3DP-PLA3-01-BK)

PLA Filament za 3D štampač 3mm kotur 1KG crni (3DP-PLA3-01-BK) Material: PLA, 3 mm diameter Weight: 1 kg/spool (2.2 lbs) Length: approx. 120 m Density at 21.5?C: 1.25 g/cm3 Melt Flow Index at 10min, 2.16kg: 5 Melt Point: 190 - 220 ?C Heat-Deflection-Temperature at 0.455 MPa: 50 ?C Yield Strength at 5mm/min: 45 MPa Impact Strength: 5 KJ/m2 Ensile Break: 20 % Diameter: 3.00 ± 0.05 mm Spool dimensions: 165 mm diameter x 100 mm height x 40 mm central hole Sistemski zahtevi: 3D štampač sa 1.75 mm ekstruder temperature oko 200 °, pogodan za PLA vlakna

2.600,- RSD
Detaljnije
PETG filament za 3D štampač 1.75mm kotur 1KG beli (3DP-PETG1.75-01-W)

PETG filament za 3D štampač 1.75mm kotur 1KG beli (3DP-PETG1.75-01-W) Material: PETG, 1.75 mm diameter Weight: 1 kg/spool (2.2 lbs) Density at 240°C: 1.27 g/cm3 Melt Flow Index at g/10min, 200°C/ 5kg: 20 Melt Point: 220 – 260 °C Heat-Deflection-Temperature at 0.455 MPa: 60 – 80 °C Yield Strength at 5mm/min: 50 MPa Impact Strength: 8.7 KJ/m2 Ensile Break: 120 % Diameter: 1.75 ± 0.05 mm Spool dimensions: 200 mm diameter x 67 mm height x 53 mm central hole Sistemski zahtevi: 3D štampač sa 1.75mm ekstruder temperature oko 240 °C, pogodno za PETG vlakna

1.950,- RSD
Detaljnije
ABS Filament za 3D stampac 1.75mm, kotur 1KG crni (3DP-ABS1.75-01-BK)

ABS Filament za 3D stampac 1.75mm, kotur 1KG crni (3DP-ABS1.75-01-BK) Materijal: ABS, prečnik 1,75 mm Težina: 1 kg / kalem (2,2 lbs) Dužina: cca. 400 m Gustina na 215 ° C: 1.01 g / cm3 Indeks protoka topljenja na 10min, 2.16kg Tačka topljenja: 225 - 240 ° C Temperatura zagrevanja 0,455 MPa: 85 ° C Snaga prinosa na 5mm / min: 45 MPa Udarna jačina: 16 KJ / m2 Ensile Break: 30% Prečnik: 1,75 ± 0,05 mm Dimenzije kalema: prečnik 165 mm k 100 mm visina k 40 mm centralna rupa Sistemski zahtevi: 3D štampač sa 1.75 mm ekstruder temperature oko 200 °, pogodan za PLA vlakna

1.950,- RSD
Detaljnije
PLA Filament za 3D štampač kotur 1KG/1.75mm zeleni (3DP-PLA1.75-01-G)

PLA Filament za 3D štampač kotur 1KG/1.75mm zeleni (3DP-PLA1.75-01-G) Material: PLA, 1.75 mm diameter Weight: 1 kg/spool (2.2 lbs) Length: approx. 330 m Density at 21.5 °C: 1.25 g/cm3 Melt Flow Index at 10min, 2.16kg: 5 Melt Point: 190 - 220 °C Heat-Deflection-Temperature at 0.455 MPa: 50 °C Yield Strength at 5mm/min: 45 MPa Impact Strength: 5 KJ/m2 Ensile Break: 20 % Diameter: 1.75 ± 0.05 mm Spool dimensions: 165 mm diameter x 100 mm height x 40 mm central hole Sistemski zahtevi: 3D štampač sa 1.75 mm ekstruder temperature oko 200 °, pogodan za PLA vlakna

1.690,- RSD
Detaljnije
ABS Filament za 3D štampač kotur 1KG/1.75mm plavi (3DP-ABS1.75-01-B)

ABS Filament za 3D štampač kotur 1KG/1.75mm plavi (3DP-ABS1.75-01-B) Material: ABS, 1.75 mm diameter Weight: 1 kg/spool (2.2 lbs) Length: approx. 400 m Length: approx. 400 m Density at 21.5 °C: 1.01 g/cm3 Melt Flow Index at 10min, 2.16kg: 5 Melt Point: 225 - 240 °C Heat-Deflection-Temperature at 0.455 MPa: 85 °C Yield Strength at 5mm/min: 45 MPa Impact Strength: 16 KJ/m2 Ensile Break: 30 % Diameter: 1.75 ± 0.05 mm Spool dimensions: 165 mm diameter x 100 mm height x 40 mm central hole Sistemski zahtevi: 3D štampač sa 1.75 mm ekstruder temperature oko 200 °, pogodan za PLA vlakna

1.950,- RSD
Detaljnije
Gembird PLA filament za 3D štampač 1,75mm kotur 1KG roze (3DP-PLA1.75-01-P)

Gembird PLA filament za 3D štampač 1,75mm kotur 1KG roze (3DP-PLA1.75-01-P) Material: PLA, 1.75 mm diameter Weight: 1 kg/spool (2.2 lbs) Length: approx. 330 m Density at 21.5 °C: 1.25 g/cm3 Melt Flow Index at 10min, 2.16kg: 5 Melt Point: 190 - 220 °C Heat-Deflection-Temperature at 0.455 MPa: 50 °C Yield Strength at 5mm/min: 45 MPa Impact Strength: 5 KJ/m2 Ensile Break: 20 % Diameter: 1.75 ± 0.05 mm Spool dimensions: 200mm diameter x 67mm height x 53mm central hole Sistemski zahtevi: 3D štampač sa 1.75 mm ekstruder temperature oko 200 °, pogodan za PLA vlakna

1.890,- RSD
Detaljnije
Gembird Filament za 3D štampač kotur 1KG/1.75mm zeleni (3DP-ABS1.75-01-G)

Gembird Filament za 3D štampač kotur 1KG/1.75mm zeleni (3DP-ABS1.75-01-G) Material: ABS, 1.75 mm diameter Weight: 1 kg/spool (2.2 lbs) Length: approx. 400 m Density at 215°C: 1.01 g/cm3 Melt Flow Index at 10 min, 2.16 kg: 5 Melt Point: 225 - 240°C Heat-Deflection-Temperature at 0.455 MPa: 85°C Yield Strength at 5 mm/min: 45 MPa Impact Strength: 16 KJ/m2 Ensile Break: 30 % Diameter: 1.75 ± 0.05 mm Spool dimensions: 165 mm diameter x 100 mm height x 40 mm central hole Sistemski zahtevi: 3D štampač sa 1.75 mm ekstruder temperature oko 200°, pogodan za PLA vlakna

1.950,- RSD
Detaljnije
PLA Filament za 3D štampač 1.75mm kotur 1KG crni (3DP-PLA1.75-01-BK)

PLA Filament za 3D štampač 1.75mm kotur 1KG crni (3DP-PLA1.75-01-BK) Materijal: PLA, 1,75 mm, prečnik Težina: 1 kg / kalem (2.2 lbs) Dužina: oko. 330 m Melt Flow Index at 10min, 2.16kg: 5 Tačka topljenja: 190-220°C Heat-Deflection-Temperature at 0.455 MPa: 50 °C Yield Strength at 5mm/min: 45 MPa Impact Strength: 5 KJ/m2 Ensile Break: 20% Prečnik: 1,75 ± 0,05mm Kalem dimenzije: 165mm prečnik, 100mm visina, 40mm Centralna rupa Sistemski zahtevi: 3D štampač sa 1.75 mm ekstruder temperature oko 200 °, pogodan za PLA vlakna

1.950,- RSD
Detaljnije
PLA Filament za 3D štampač 1.75mm kotur 1KG Fluorescent Crveni (3DP-PLA1.75-01-FR)

PLA Filament za 3D štampač 1.75mm kotur 1KG Fluorescent Crveni (3DP-PLA1.75-01-FR) Materijal: PLA, 1,75 mm, prečnik Težina: 1 kg / kalem (2.2 lbs) Dužina: oko. 330 m Melt Flow Index at 10min, 2.16kg: 5 Tačka topljenja: 190-220°C Heat-Deflection-Temperature at 0.455 MPa: 50 °C Yield Strength at 5mm/min: 45 MPa Impact Strength: 5 KJ/m2 Ensile Break: 20% Prečnik: 1,75 ± 0,05mm Kalem dimenzije: 200mm prečnik, 67mm visina, 53mm Centralna rupa Sistemski zahtevi: 3D štampač sa 1.75 mm ekstruder temperature oko 200 °, pogodan za PLA vlakna

1.950,- RSD
Detaljnije
Gembird PLA filament za 3D štampač 1.75mm kotur 1KG beli (3DP-PLA1.75-01-W)

Gembird PLA filament za 3D štampač 1.75mm kotur 1KG beli (3DP-PLA1.75-01-W) Može se primeniti na različitim 3D štampačima Material: PLA, 1.75 mm diameter Weight: 1 kg/spool (2.2 lbs) Length: approx. 330 m Density at 21.5 °C: 1.25 g/cm3 Melt Flow Index at 10min, 2.16kg: 5 Melt Point: 190 - 220 °C Heat-Deflection-Temperature at 0.455 MPa: 50 °C Yield Strength at 5mm/min: 45 MPa Impact Strength: 5 KJ/m2 Ensile Break: 20 % Diameter: 1.75 ± 0.05 mm Spool dimensions: 165 mm diameter x 100 mm height x 40 mm central hole Sistemski zahtevi: 3D štampač sa 1.75 mm ekstruder temperature oko 200 °, pogodan za PLA vlakna

Prijavite se na newsletterkako biste primali mail sa novim proizvodima i akcijama